1. Positioning and lofting

將制作好的假山模型放到現場做定位確定*終位置。然后進行基礎的挖土線。

Place the completed rockery model on site for positioning and final positioning. Then proceed with the excavation line for the foundation.

2、骨架制作

2. Skeleton production

需要各種不同規格的鋼筋來制作。作為結構的主要受力部位，主骨架的規格*高，對焊接工藝有嚴格的要求，并且焊縫的時候要注意防銹處理。

Various specifications of steel bars are required for production. As the main load-bearing part of the structure, the main framework has high specifications and strict requirements for welding processes. When welding, attention should be paid to rust prevention treatment.

3、鋼筋網綁扎

3. Steel mesh binding

采用φ6的圓鋼制作鋼筋網，焊接在骨架上。同樣的也要做防腐處理。根據具體的設計要求，對每個部分進行敲壓修整等處理，規劃處山體的輪廓線條。確認無誤后進行綁扎定位。

use φ 6 round steel bars are made into steel mesh and welded to the skeleton. Similarly, anti-corrosion treatment should also be carried out. According to specific design requirements, each part is subjected to pressure trimming and other treatments, and the contour lines of the mountain are planned. After confirming that there are no errors, proceed with binding and positioning.

4、打底掛漿

4. Underlay hanging slurry

將水泥砂漿、纖維性輔料和建筑膠水等以一定的比例進行混合，鋪滿整個鋼筋網。

Mix cement mortar, fibrous auxiliary materials, and building adhesive in a certain proportion to cover the entire steel mesh.

5、紋理雕刻

5. Texture carving

根據設計方案的詳細要求，由工藝師對假山進行詳細的紋理雕刻。首**行外部輪廓的基礎造型，達到一個整體的效果視覺。在對局部的細節進行詳細的雕刻。包括表面的褶皺、斷層和過渡等細致的刻畫。在雕刻的過程中需要反復的進行遠近、正側等多方位的觀察。協調假山各個方位的藝術效果。

According to the detailed requirements of the design plan, the craftsman will perform detailed texture carving on the rockery. The basic shape of the outer contour of the first * * line achieves an overall visual effect. Detailed carving of local details. Including detailed depictions of surface folds, faults, and transitions. During the carving process, it is necessary to repeatedly observe from multiple angles such as far, near, front, and side. Coordinate the artistic effects of various aspects of the rockery.

6、上色

6. Coloring

在上色前先要山體清潔并干燥到位。根據周圍的環境因素，確定好配色方案后，在進行多次多層的噴涂潤色處理，已達到佳的視覺效果。并且要做油面處理，可以防止掉色的同時防水防潮。

Before coloring, the mountain should be cleaned and dried in place. Based on the surrounding environmental factors, after determining the color scheme, multiple multi-layer spray polishing treatments have been carried out to achieve good visual effects. And oil surface treatment should be done to prevent color fading while also being waterproof and moisture-proof.