<ruby id="hhbj2"><ruby id="hhbj2"></ruby></ruby>
<source id="hhbj2"><track id="hhbj2"></track></source>

      1. <source id="hhbj2"><track id="hhbj2"></track></source>

        歡迎來到濟南錦山繡水園林工程有限公司官方網站
        熱銷產品關鍵詞: 濟南假山制作 濟南上水石假山 濟南庭院景觀
        產品 新聞
        • 濟南上水石假山
        • 濟南真石假山
        • 濟南庭院景觀
        新聞中心
        新聞推薦
        聯系我們
        • 服務熱線:15610114816
        • 地址:濟南市仲宮鎮商家
        行業新聞
        當前位置:首頁 > 新聞中心 > 行業新聞 > 太湖石假山的堆砌設計的方法

        太湖石假山的堆砌設計的方法

        來源:http://www.ultimateslotcar.com/industry/619.html  更新時間:2023-04-24
        【安】將一塊山石平放在一塊至幾塊山石之上的疊石辦法就叫做“安”。這里的安字又有安穩的意義,即請求平放的山石要放穩,不能被動搖,石下不穩處要用剝石實剎緊。
        The method of stacking a mountain stone flat on top of one or several stones is called "An". The word 'An' here also has a sense of stability, meaning that the mountain stones that are requested to be laid flat should be placed firmly and not shaken, and the unstable areas under the stones should be firmly braked with stone stripping.
        【壓】為了穩定假山懸崖或使出挑的山石堅持均衡,用重石鎮壓懸崖后部或出挑山石的后端,這種疊石辦法就是“壓”。
        In order to stabilize the rockery cliff or maintain the balance of the protruding rocks, heavy stones are used to suppress the rear of the cliff or the rear of the protruding rocks. This method of stacking stones is called "pressing".
        【錯】即參差疊石,山石和下石采取錯位相疊,而不是平齊疊放。“錯”的技法能夠使層疊的山石更多變化,疊砌體外表更易構成溝槽、凹凸和整齊的形體特征,使山形形象愈加生動自然。
        濟南專業假山制作
        Wrong "refers to the staggered stacking of stones, where the mountain stones and lower stones are stacked in a staggered manner, rather than being stacked horizontally. The technique of 'wrong' can make the stacked stones more varied, and the appearance of stacked masonry is more likely to form grooves, bumps, and neat physical features, making the mountain shape image more vivid and natural.
        【搭】用長條形石或板狀石跨過其下方兩邊別離的山石,并蓋在別離山石之上的疊石技法稱為“搭”。
        The stacking technique of using long or flat stones to cross the separated rocks on both sides below and cover them on top of the separated rocks is called "stacking".
        【連】山石之間程度銜接,稱為“連”。相連的山石在其銜接處在茬口外形和石面皺紋要盡可能互相吻合,能做到嚴絲合縫最理想。多數狀況下只能請求根本吻合。
        The degree of connection between mountains and rocks is called 'connection'. The shape of the connected rocks at their joints and the wrinkles on the stone surface should match each other as much as possible to achieve a perfect fit. In most cases, only a fundamental match can be requested.
        【夾】在上下兩層山石之間,塞進比擬小塊的山石并用水泥砂漿固定下來,就可在兩層山石間做出洞穴和孔眼。其特性是二石上下相夾,所做孔眼好像程度槽縫狀。
        【 Clip 】 Insert small pieces of mountain stones between the upper and lower layers and fix them with cement mortar to create caves and holes between the two layers of mountain stones. Its characteristic is that the two stones are sandwiched up and down, and the holes made seem to be in a groove like shape.
        【挑】又叫“出挑”、“外挑”或“懸挑”是應用長形山石做挑石,橫向伸出于其下層山石之外,并以下層山石支承重量,再用另外的重石壓住挑石的后端,使挑石均衡地挑出。這是各類假山都運用很普遍的一種山石堆疊辦法。
        [Overhang], also known as "overhanging", "overhanging" or "overhanging", refers to the use of long shaped stones as overhanging stones, which extend horizontally beyond the lower layer of the stones and support the weight of the lower layer of the stones. Then, another heavy stone is used to press the rear end of the overhanging stones to evenly lift them out. This is a common method of stacking rocks in various types of rockeries.
        本文由濟南景石安裝提供幫助,更多的相關內容請點擊 http://www.ultimateslotcar.com希望本文能夠為您帶來幫助,感謝您的閱讀!
        This article is provided by Jinan Jingshi Installation for assistance. For more related content, please click http://www.ultimateslotcar.com I hope this article can be helpful to you. Thank you for reading!
        相關新聞
        相關產品
        中文字幕91_96热这里是精品国产_久久精品分类视频_久久久久人人超碰

        <ruby id="hhbj2"><ruby id="hhbj2"></ruby></ruby>
        <source id="hhbj2"><track id="hhbj2"></track></source>

          1. <source id="hhbj2"><track id="hhbj2"></track></source>